up a large number of workflows, for example, selects could be saved to the SD card where an
assistant on a remote computer can quickly transfer these selects and begin processing.!
PT Hub & MP-360 Tripod Head!
To use the PT Hub and motorized tripod head a CamRanger and supported camera are
required.!
PT Hub Hardware!
1. USB A Connector - Connects to CamRanger!
2. Serial Connector - Connects to PT Hub!
3. USB B Connector - Connections to camera!
MP-360 Motorized Tripod Head Hardware!
•
Threaded Mounting Point - 1/4 20 threaded female opening for mounting to an existing
tripod head (does NOT mount directly onto tripod legs)!
To Next Page
Loading...