The “…” button at the bottom right displays options based on the context. When viewing a
captured image, the options will be: Toggle Full Screen, Share, Edit, Rate, and Delete.
Toggling full screen will expand and shrink the image view to take up the full screen or resume
its normal position. Selecting Delete will prompt the user to confirm the deletion of the image
from the camera’s memory card. Selecting Share will bring up the file sharing dialog allowing
a number of options, including saving the image to the device’s photo library. Please see the
image sharing section for more details. The Edit button will open the image editing window to
crop, rotate, and adjust the image. Please see the image editing section for more information.!
Live View Stream!
When live view is on, the image in the main image view is automatically updated as new live
view frames are received. The frame rate can vary greatly based on a number of parameters
such as the signal strength and camera model. However, assuming a good connection, about
15 fps would be typical.!
During live view the image
may be single tapped to
focus on that point, also
known as “touch focus”.
For cameras that support
it, the focus box that is
displayed will temporarily
turn green if focus is
acquired and turn red if
focusing failed. Note that
the CamRanger does not
actually do any focusing,
but simply tells the
camera to try to focus at the selected area.!
To Next Page
Loading...