Battery
The CamRanger 2 battery is a rechargeable, replaceable 3400 mAh lithium ion battery. The
battery is accessed by removing the battery compartment on the bottom of the CamRanger.
The battery is marked with a positive (+) and negative (-) end and the battery must be inserted
in the proper orientation, matching the diagram in the battery compartment.!
One method to ease in removal of the battery is to push the battery down against the spring
with a spring or finger and then use the corner of the battery compartment cover at the top of
the battery to pop out the battery.!
The battery lasts about 5-6 hours in normal usage. The number and range of wireless
connections as well as how much data is being transmitted are the largest factors in battery
life.!
The battery can be charged in the CamRanger 2 using a micro USB cable. 5V 2A input is
ideal. Lower current input can be used, but charging may take longer. While charging the
charging light will turn orange. If there
is a failure during charging, the
orange LED will blink. The battery can
also be charged outside of the
CamRanger 2 using the charger
available from CamRanger.com.!
The CamRanger 2 battery is designed
with a number of safety features.
However, care must still be used
when using or storing batteries. It is
important to follow these precautions:!
To Next Page
Loading...