BUILT-IN GAS OVENS WITH GRILL ▪ FO Series
21
FO Series – ed. 01/2020
To connect the generator to the local low-voltage electricity distribution network, follow these steps:
Connect the free end of the NEGATIVE (-) black conductor to the negative pole of the
network terminals or an accumulator.
Connect the free end of the POSITIVE (+) red conductor to the positive pole of the
network terminals or an accumulator.
Positive pole power cable
Positive pole power cable
Generator switch connection cable
Fast-on spark plug housing
Fast-on spark plug connectors
Connectors (+/-) Fast-on 12V DC power supply
CAUTION!
It is strictly forbidden to attempt any type of connection of the equipment to a power
supply network that is not 12V and in direct current (DC). Any other connection may
pose a very serious hazard to the user of the equipment and cause irreversible
damage to the device itself.
To Next Page
Loading...