BUILT-IN GAS OVENS WITH GRILL ▪ FO Series
22
FO Series – ed. 01/2020
TROUBLESHOOTING AFTER INSTALLATION
If the appliance is not working properly after installation, perform the checks given in the table.
There is a smell of gas near
the appliance
Check that the gas valves are completely closed. If the problem
persists, disconnect the equipment from the gas network and
request technical assistance
The gas flow
seems irregular
Check that the gas valve is fully open.
Check that the power supply network of the fuel has an adequate
flow rate.
Check that the components of the burners are firmly attached to
the structure: correctly placed in their housings and free from
obstructions.
Check that the nozzles are suitable for the type of gas used.
Check compatibility and correct calibration of the pressure
regulator, if present.
Check that the gas supply pipe is free of bottleneck/obstruction
and ensure that the system shut-off valve is fully open.
The power button does not
work
Check the electrical connection and check that there is voltage
If after all the checks carried out, the equipment still does not function properly,
contact your local authorized dealer.
WARNING: always disconnect the equipment from the gas system after each use and
before storing it in your storage niche.
To Next Page
Loading...