BUILT-IN GAS OVENS WITH GRILL ▪ FO Series
32
FO Series – ed. 01/2020
OPERATION ANOMALIES
The following situations are considered to be operating malfunctions and assistance is required if:
• The flame of the burner is yellow.
• You notice the formation of soot on the interior accessories or on the bottom of the device.
• Burners do not ignite properly.
• The burners won’t stay lit.
• The burners are switched off when the kitchen doors are moving.
• The control knob is difficult to operate.
If the appliance is not working, contact the authorised local dealer.
PROCEDURES TO FOLLOW IN THE EVENT OF MALFUNCTIONING
Before contacting your nearest Support Centre, carry out the following operations:
verify that the hob is properly connected to the installation;
check that the hob is properly powered;
identify the data of the appliance from the CE label bearing the product serial number;
find the date and a suitable document (invoice or receipt) certifying the purchase of the equipment.
CAUTION!
While you wait for the problem to be resolved, you should not use the appliance and
isolate it from all systems to which it was previously connected.
Do not attempt to repair or tamper with the appliance.
CAN S.r.l. ensures optimal collaboration and support if technical or other type of problems should
arise, on any of its products.
For any information or assistance request contact your nearest retailer or get in touch with CAN S.r.l.
To Next Page
Loading...