EasyManua.ls Logo

Canberra 2016 - VMS Software Installation

Default Icon
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C. VMS Software Installation
To install the Genie-VMS software, log in as SYSTEM and use the VMSINSTAL util
-
ity:
$ @sys$update:vmsinstal TCA mka500:
Where:
TCA is the name of the installation save set (VAX processors only. Use TCX for
Alpha processors).
mka500: is the name of the backup device (substitute the appropriate name if
mka500: is incorrect).
After installation is complete, edit the OpenVMS system startup command procedure
(typically SYSTARTUP_V5.COM or SYSTARTUP_VMS.COM), and add the fol-
lowing line somewhere after the standard Genie-VMS 0198start procedure is called.
$ @nd_library:0913start.com
To use the software immediately, you may either reboot the machine, or execute the
previous command directly from a DECterm.
Next, log in as the user that will be using the AMP/TCA software. Using this account,
you must modify (or create) the XGSA_USR_RUN.DAT file in the SYS$LOGIN di
-
rectory. This file is used to add menu options to the Spectroscopy Assistant. A demo
XGSA_USR_RUN.DAT file is provided in the ND_0913_DEMO directory. You
may copy this file if desired:
$ copy nd_0913_demo:xgsa_usr_run.dat sys$login:*.*
Or if you already have an existing XGSA_USR_RUN.DAT file, you may merge the
new information into your existing file.
47

Table of Contents