CT-2000 Instruction Manual
• Observe all warning labels. Never remove warning labels.
• Never operate damaged or leaking equipment.
• Unless procedures specify otherwise, always turn off the unit and disconnect the MAINS cable
from the power source before performing service or maintenance procedures, or before
moving the unit.
• Refer all service and repairs to qualified personnel.
Warning: The bath fluid used with the CT-2000 may be hazardous. Use
proper safety precautions when handling the bath fluid and refer to the
(Material) Safety Data Sheets included with the bath fluid for more detail.
Caution: Do not attempt to service the CT-2000 system by removing panels and
trying to effect repairs. Contact CANNON regarding service and repair needs.
~MAINS
The
symbol indicates the connections for the AC power supply. The AC
power input must match the electrical specifications of the instrument.
Never operate the equipment with a damaged MAINS AC power cable.
Use only the manufacturer-supplied MAINS AC power cable. This cable must be
inserted into a receptacle with a protective earth ground.
(O)
(O) symbol indicates the OFF position for the electrical switches for your unit.
To Next Page
Loading...
