Canon B820 - Page 39

SW09 (Service Soft Switch09; Summer time setting)
Bit Function 1 0
0 Not in use
1 Not in use
2 Not in use
3 Not in use
4 Not in use
5 Not is use
6 Summer time setting On Off
7 Not in use
#1 SSSW
SW12 (Service Soft Switch12; Page Timer Setting)
Bit Function 1 0
0 TX Page Timer 1 0*
(When image mode is set to letters)
1 TX Page Timer 1* 0
(When image mode is set to letters)
2 TX Page Timer 1 0*
(When image mode is set to anything other than letters)
3 TX Page Timer 1 0*
(When image mode is set to anything other than letters)
4 RX Page Timer 1 0*
5 RX Page Timer 1 0*
6 Not in use
7 Page Timer setting by TX/RX Yes No
Use this SW to set Page Timer.
The machine halts communication if TX/RX takes 32 minutes or longer.
Please select appropriate time setting is TX/RX takes more than 32 minutes.
If [No] is selected for Bit 7, timeout period is determined by Bit 0 and Bit 1 in any mode.
1-34