141
Menu Settings
8
Registering Custom Function Groups
Select the group number.
•
While pressing the < > button, turn the < >
dial to select a group number from “P.Fn-0-1” to
“P.Fn-0-3.” Then let go of the <
> button.
s
When you select an unregistered group number, the
“Not registered” message will appear. If you select a
registered group number, the Custom Function
settings in that group will be displayed.
5
Register the Custom Function settings
under the selected group number.
•
While pressing the < > button, turn the < >
dial to select “OK.” Then let go of the <
>
button.
6
Check the registered group’s Custom
Function settings.
•
Check the registered Custom Function settings and
press the <
> button.
s
The menu in step
3
will reappear.
•
To register another Custom Function group, repeat
steps
1
to
7
. If you want to change any Custom
Function settings in a group, also repeat steps
1
to
7
.
•
Press the < > button to return to the menu. To
exit the menu and turn off the LCD monitor, press
the <
> button again.
•
To incorporate the group’s Custom Function
settings into the camera, follow “Using a Custom
Function Group” on the next page.
7
MENU
To Next Page
Loading...
