10-7
Maintenance
NOTE
Do not dampen the cloth too much, as this
may tear the document or damage the
machine.
4 Close the ADF cover.
CAUTION
Be careful not to get your fingers caught.
5 Open the ADF.
6 Clean the ADF scanning area (on
the left side of the platen glass)
and the document feeding roller
with a cloth dampened with
water. Then wipe the area with a
soft, dry cloth.
7 Close the ADF.
CAUTION
Be careful not to get your fingers caught.
8 Reconnect the power cord and
turn on the main power switch.
To Next Page
Loading...
