Canon IMAGECLASS MF4150 - Page 160

12-10
Machine Settings
RX MODE Selects the receive mode. (See Chapter 1,“Advanced Fax
Features,” in the Advanced Guide.)
–FaxOnly
– AnsMode
– DRPD
– FAX/TEL
–MANUAL
RX TERMINAL ID Sets whether to insert the machine’s fax number and the
sender information on received faxes.
–OFF
–ON
RX RESTRICTION You can reject faxes from senders with no fax/telephone
number in their sender information. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
OFF All receptions are conducted.
ON Receives the fax only from the sending fax machine that
sends the TSI signal.
REMOTE RX Sets whether to use remote receiving. (See Chapter 1,
“Advanced Fax Features,” in the Advanced Guide.)
–ON
–OFF
FAX SETTINGS