1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
1-8
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
R [Tone] key
Press to switch from rotary pulse to tone dialing.
S [Clear] key
Press to clear entered alphanumeric characters.
T [ ] key
Press to increase the value for various settings. Also press to
see the next item in the menu.
U [OK] key
Press to accept a set function or mode.
Also press and hold to print a sample page when you are in
the copy mode. For details, see “Printing a Sample Page,” on
p. 3-10.
V [ ] key
Press to decrease the value for various settings. Also press to
see the previous item in the menu.
W LCD display
Displays messages and prompts during operation. Displays
selection, text, and numbers when adjusting the settings.
X [Toner Gauge] key
Press to check the toner remaining in the toner cartridge.
To Next Page
Loading...
