1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-12
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Specifying Recipients
Follow the procedure below to send documents to registered
recipients.
Using One-Touch Speed Dialing Keys
To use this feature, you must register recipients in one touch speed dialing
keys beforehand. (See “Storing/Editing Address Book,” on p. 4-6.)
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [FAX].
If you want to adjust the image quality and density, see “Scan
Settings,” on p. 4-5.
■
3 . Press the desired one-touch speed dialing keys
(01 to 08).
If you pressed a wrong key, press [Stop/Reset] and try again.
=0123XXXXXX
[05]CANON USA
Ex.
4. Press [Start].
When you set the documents on the platen glass, press [Start] for
each document. When scanning is complete, press [OK] to start
sending.
To Next Page
