Canon ImageCLASS MF4270 - Document and Paper; Copying 3; Press [ ] or; Printing and

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-27
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
5. Press [ ] or [ ] to select <ON>, then press
[OK].
When you select <OFF>, the machine starts to print the received
documents in memory.
6. If you want to set a password, press [ ] or
[
] to select <PASSWORD>, then press [OK].
If you need not set a password, skip to step 8.
7. Use the numeric keys to enter the memory lock
reception password (up to seven digits), then
press [OK].
PASSWORD
1234567
Ex.
8. If you want to specify <MEMORY RX TIME>,
press [
] or [ ] to select <MEMORY RX
TIME>, then press [OK].
If you need not set the timer for memory lock, skip to step 12.
9. Press [ ] or [ ] to select <ON>, then press
[OK].
10. For <MEM. RX START TIME>, use the numeric
keys to enter the start time (in 24-hour format),
then press [OK].
MEM. RX START TIME
00:00
Ex.
11. For <MEM. RX END TIME>, use the numeric keys
to enter the end time, then press [OK].
12. Press [Stop/Reset] to return to the standby
mode.
Printing All Documents Stored in Memory
1. Perform step 1 to 3 in “Memory Lock Reception,”
on p. 4-26.