Canon ImageCLASS MF4270 - Coded Speed Dialing Codes

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-7
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Storing/Editing One-Touch Speed Dialing
Keys/Coded Speed Dialing Codes
Registering One-Touch Speed Dialing Keys/Coded
Speed Dialing Codes
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED DIAL>, then press [OK].
4 . Press [ ] or [ ] to select a one-touch speed
dialing key (01 to 08) or coded speed dialing
code (00 to 99) for which you want to register
the fax/telephone number, then press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the desired two-digit code.
■
5. Enter the recipient name (max. 20 letters,
including spaces) with the numeric keys, then
press [OK].
NAME [A]
Can
Ex.
6. Enter the fax/telephone number you register
(max. 50 digits, including spaces and pauses)
with the numeric keys, then press [OK].
012XXXXXXX_
TEL NUMBER ENTRY
Ex.
To register another one-touch speed dialing key or coded speed
dialing code, repeat the procedure from step 4.
7. Press [Stop/Reset] to return to the standby
mode.
Editing One-Touch Speed Dialing Keys/Coded
Speed Dialing Codes
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].