1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-8
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED DIAL>, then press [OK].
4 . Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 08) or coded speed
dialing code (00 to 99) you want to edit, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5. Press [ ] repeatedly to go to the character you
want to change, then press [Clear].
To delete the entire entry, press and hold [Clear].
6. Enter a new character with the numeric keys,
then press [OK].
7. Press [ ] repeatedly to go to the wrong digit,
then press [Clear] to delete it.
To delete the entire entry, press and hold [Clear].
8. Enter a new number with the numeric keys, then
press [OK].
9. Press [Stop/Reset] to return to the standby
mode.
Deleting One-Touch Speed Dialing Keys/ Coded
Speed Dialing Codes
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <1-TOUCH SPD
DIAL> or <CODED DIAL>, then press [OK].
4 . Press [ ] or [ ] to select the one-touch
speed dialing key (01 to 08) or coded speed
dialing code (00 to 99) you want to delete, then
press [OK].
You can also select a one-touch speed dialing key or coded speed
dialing code by pressing the corresponding one-touch speed dialing
key, or [Coded Dial] followed by the two-digit code.
5. Press [OK].
To Next Page
