Canon ImageCLASS MF4270 - Basic Sending Method

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-29
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Receiving a Fax Remotely
1. When you receive a call, pick up the external
telephone.
2. Use the numeric keys to enter the two-digit
remote reception ID to start reception.
If the machine is set for pulse dialing, press [Tone] to switch to tone
dialing before pressing the remote reception ID.
3. When the reception is complete, hang up the
telephone.
Selecting the Receive Mode for Printing
You can select whether the machine stores all received pages in
the memory before printing them out or prints each page as it is
received.
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <FAX SETTINGS>,
then press [OK].
3. Press [ ] or [ ] to select <RX SETTINGS>,
then press [OK].
4. Press [ ] or [ ] to select <RX PRINT>, then
press [OK].
5. Press [ ] or [ ] to select desired printing
method, then press [OK].
<MEMORY RX>: Prints after all the pages of the document are
received.
<PRINT RX>: Prints each page as it is received.
6. Press [Stop/Reset] to return to the standby
mode.
■