1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-4
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
Basic Sending Method
Follow this procedure to send faxes.
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
2. Press [FAX].
If you want to adjust the image quality and density, see “Scan
Settings,” on p. 4-5.
3. Enter the fax number with the numeric keys.
You can also specify the fax number with one-touch speed dialing
keys, coded speed dialing codes or [Address Book] key. (See
“Specifying Recipients,” on p. 4-12.)
4. Press [Start].
When you set the documents on the platen glass, press [Start] for
each document. When scanning is complete, press [OK] to start
dialing.
To Next Page
