Canon ImageCLASS MF4270 - 3 Copying

1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
4-10
Before Using the
Machine
Document and Paper
Copying
Sending and
Receiving
Printing and
Scanning
Network
Remote UI
System Manager
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
7. Press [Stop/Reset] to return to the standby
mode.
Adding New Recipients to Group
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4. Press [ ] or [ ] to select a group to edit, then
press [OK].
You can specify a group to edit by pressing the corresponding one-
touch speed dialing key.
5. Press [OK].
6. Select the recipient you want to add to the
group, then press [OK].
For details on specifying a recipient from Address Book, see
“Registering Recipients for Group Dialing,” on p. 4-9.
7. Press [Stop/Reset] to return to the standby
mode.
Deleting Recipients from Group
1. Press [Additional Functions].
2. Press [ ] or [ ] to select <ADDRESS BOOK
SET.>, then press [OK].
3. Press [ ] or [ ] to select <GROUP DIAL>,
then press [OK].
4. Press [ ] or [ ] to select a group to edit, then
press [OK].
You can specify a group to edit by pressing the corresponding one-
touch speed dialing key.
5. Press [OK].
6. Press [ ] or [ ] to display the recipient
you want to delete from the group, then press
[Clear].
Repeat this step if you want to delete another recipient.
7. Press [OK].
8. Press [Stop/Reset] to return to the standby
mode.