Canon imageCLASS MF6540 - Page 110

4-9
Sending Faxes
7 Press [ ] or [ ] to select <NAME>, then press [OK].
8 Enter the recipient’s name (max. 16 letters, including spaces) with the numeric
keys, then press [OK].
N A M E
: A
C a n
Ex.
To register another one-touch speed dialing key or coded speed dialing code, repeat the procedure
from step 4.
You can specify the following optional settings (<LONG DISTANCE>, <TX SPEED>, and <ECM>) for
the fax number you are registering.
For instructions, see Chapter 4, “Sending and Receiving (MF6595cx/MF6595/MF6590 Only),” in the
Reference Guide.
9 Press [Stop] to return to the standby mode.
–
–