12-17
Machine Settings
FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
2. TWO-SIDED PRINT Sets the type of two-sided printing for faxing. (See Chapter 4,
“Sending and Receiving (MF6595cx/MF6595/MF6590 Only),” in
the Reference Guide.)
OFF
ON
–
–
3. CONT. PRINTING Selects how the machine responds when the <TONER LOW/
PREPARE NEW TONER> message appears.
RX TO MEMORY The machine stores all documents in memory.
KEEP PRINTING The machine does not store documents in memory if the toner
runs out. Reset to <RX TO MEMORY> after replacing the toner
cartridge.
ADDRESS BOOK SET. (MF6595cx/MF6595/MF6590 Only)
Setting Item Description
1. 1-TOUCH SPD DIAL Registers the information on one-touch speed dialing. Up to 23
destinations can be registered. (See “Storing/Editing One-Touch
Speed Dialing Keys/Coded Speed Dialing Codes,” on p. 4-7.)
1. TEL NUMBER ENTRY Registers the recipient’s fax number (max. 120 digits, including
spaces).
2. NAME Registers the recipient’s name (max. 16 characters, including
spaces).
To Next Page
Loading...
