Machine Settings
12-16
FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
5. REMOTE RX Sets whether to use remote receiving. This function is not
available when <ENERGY IN SLEEP> in <COMMON SETTINGS>
is set to <LOW>. (See Chapter 4, “Sending and Receiving
(MF6595cx/MF6595/MF6590 Only),” in the Reference Guide.)
ON The machine enables remote receiving.
REMOTE RX ID You can dial a code on remote extension to start receiving a
document.
A combination of two characters using 0 to 9, * and # is possible.
(25)
OFF The machine disables remote receiving.
6. MANUAL/AUTO Sets whether the machine switches to the document receive
mode after the external telephone rings for a specified length of
time in the manual receive mode.
OFF The external telephone keeps ringing until someone answers
the call manually.
ON The machine switches to the document receive mode after the
external telephone rings for a specified time.
F/T RING TIME Sets the length of time to elapse before the machine switches to
document receiving. (1SEC–99SEC)(15SEC)
5. PRINTER SETTINGS Sets the to printer functions.
1. RECEIVE REDUCTION Sets whether the received images print out at a reduced size.
(See Chapter 4, “Sending and Receiving (MF6595cx/MF6595/
MF6590 Only),” in the Reference Guide.)
ON Image reduction is turned on.
1. RECEIVE
REDUCTION
Selects the reducing type.
AUTO
FIXED REDUCTION (90%, 95%, 97%, 75%)
–
–
2. REDUCE
DIRECTION
Selects the reducing direction.
VERTICAL ONLY
HORIZ & VERTICAL
–
–
OFF Image reduction is turned off.
To Next Page
Loading...
