4-37
Sending Faxes
Checking and Deleting TX Jobs
System monitor enables you to view the transmission results, monitor the status of
the send jobs currently being processed.
Checking Transmission Results
1 Press [System Monitor].
2 Press [ ] or [ ] to select <TX/RX LOG>, then press [OK].
If you set <CHECKING THE LOG> to <OFF> in <SYSTEM SETTINGS>, transmission result does not appear
in the LCD.
3 Press [ ] or [ ] to view the required transmission result.
4 Press [Stop] to return to the standby mode.
To Next Page
Loading...
