12-15
Machine Settings
FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
4. RX SETTINGS Sets the reception functions.
1. ECM RX Sets whether the ECM (Error Correction Mode) reception is
activated.
ON
OFF
–
–
2. FAX/TEL OPT. SET Sets the optional items in the <FaxTel> mode. (See Chapter 4,
“Sending and Receiving (MF6595cx/MF6595/MF6590 Only),” in
the Reference Guide.)
1. RING START TIME Sets the time the machine takes to check whether a call is a fax
or a voice call. (0SEC–30SEC)(6SEC)
2. F/T RING TIME Selects the ring length for voice calls. (15SEC–300SEC)(15SEC)
3. F/T SWITCH ACTION Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
RECEIVE
DISCONNECT
–
–
3. DRPD:SELECT FAX Selects the ring pattern for fax calls.
DOUBLE RING
SHORT-SHORT-LONG
SHORT-LONG-SHORT
OTHER RING TYPE
NORMAL RING
–
–
–
–
–
4. INCOMING RING Sets whether the external telephone rings when it receives a
voice call, enabling you to answer the call. This function is only
available when <RX MODE> is set to <FaxOnly> or <FaxTel>.
OFF The telephone does not ring when it receives a voice call. (In the
Sleep mode, the telephone may ring one or two times.)
ON The telephone rings when it receives a voice call if an external
telephone is connected.
RING COUNT Sets the number of incoming rings before the machine answers.
(1TIMES–99TIMES)(2TIMES)
To Next Page
Loading...
