3-11
Copying
5 Use the numeric keys to enter the desired copy quantity (1 to 99).
6 Press [Start].
When the documents are loaded in the ADF, collate copying starts and no further operation is required.
7 Place the next page of the document on the platen glass, then press [Start].
Repeat this step to scan all pages.
8 Press [OK].
The machine prints the remaining sets of copies.
To cancel all settings, press [Reset].
When you switch the mode by pressing the mode keys such as [FAX], all settings will be also
canceled. If you want to keep the settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>, See “STANDARD SETTINGS,” on p. 12-10.
When scanning multiple page documents, <MEMORY FULL> may appear in the LCD and scanning
may be canceled. If this happens, press [Stop] to return to the standby mode, and print, send, or
delete any documents stored in memory.
–
–
–
To Next Page
Loading...
