3-21
Copying
6 Press [ ] or [ ] to select <BOOK TYPE> or <CALENDAR TYPE> (for the
copies), then press [OK].
7 Press [Start].
To cancel all settings, press [Reset].
When you set the document on the platen glass, press [Start] for each document. When scanning is
complete, press [OK].
You can skip steps 5 and 6. In this case, the machine scans two-sided documents in the <BOOK TYPE>
orientation and outputs the same way.
If you press [Start] in step 5 after selected <CALENDAR TYPE>, the machine scans two-sided
documents in the <CALENDAR TYPE> orientation and outputs the same way.
–
–
–
–
To Next Page
Loading...
