Canon imagePROGRAF iPF6450 Basic Guide

Roll paper is not securely in contact with roll holder.
Roll paper is not securely in contact with roll holder.
Cause Corrective Action
Skew Check Lv. on the Control Panel menu is set to something oth-
er than Off and the roll paper is not placed securely in the Roll Hold-
er during loading.
Follow these steps to reload the roll.
1. Press the OK button and remove the roll holder from the printer.
2. Insert the roll firmly on the Roll Holder until it touches the flange.
(See "Loading Rolls on the Roll Holder.") →P.9
3. Load the Roll Holder in the printer.
iPF6450 Roll paper is not securely in contact with roll holder.
Basic Guide
Error Message Messages regarding paper
141

Canon imagePROGRAF iPF6450 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6450
Category	Printer
Language	English