EasyManuals Logo

Canon imagePROGRAF iPF6450 Basic Guide

Canon imagePROGRAF iPF6450
159 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Cleaning the Printer
Cleaning the Printer
Cleaning Inside the Top Cover .................................................................................................................................. 51
Cleaning the Printhead ................................................................................................................................................. 53
Cleaning the Spectrophotometer Unit (option) Parts ..................................................................................... 54
Cleaning Inside the Top Cover
Cleaning Inside the Top Cover
Clean inside the Top Cover about once a month to maintain better printing quality and help prevent problems.
Also clean inside the Top Cover in the following situations to ensure optimal operation.
If the printed surface or the underside of paper is dirty after printing
After you have used up a roll
After borderless printing
After printing on small paper
After printing on paper that generates a lot of cutting debris
If you have replaced the roll
After printing on paper that generates a lot of paper dust
If the message "Blue platen switch is dirty." is displayed
Important
If the Platen inside the Top Cover becomes dirty, it may soil the underside of paper. We recommend cleaning the Plat-
en after borderless printing or printing on small paper.
If the Ejection Guide is dirty, it may soil the edge of the paper when the paper is cut. We recommend cleaning the
Ejection Guide even if it does not appear dirty, because it may actually be covered with paper dust.
1
On the Tab Selection screen of the Control Panel, press or
to select the Settings/Adj. tab ( ).
Note
If the Tab Selection screen is not displayed, press the Menu button.
2
Press the OK button.
The Set./Adj. Menu is displayed.
3
Press or to select Maintenance, and then press the OK button.
4
Press or to select Clean Platen, and then press the OK button.
A message on the Display Screen requests you to open the Top Cover.
5
Open the Top Cover.
iPF6450
Cleaning Inside the Top Cover
Basic Guide
Consumables and Maintenance Cleaning the Printer
51

Table of Contents

Other manuals for Canon imagePROGRAF iPF6450

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon imagePROGRAF iPF6450 and is the answer not in the manual?

Canon imagePROGRAF iPF6450 Specifications

General IconGeneral
BrandCanon
ModelimagePROGRAF iPF6450
CategoryPrinter
LanguageEnglish

Related product manuals