Canon imagePROGRAF iPF6450 Basic Guide

Messages regarding printing or adjustment
Messages regarding printing or adjustment
Cannot execute this command. Use other paper. .......................................................................................... 144
Cannot print as specified. ......................................................................................................................................... 144
Cannot adjust printhead. ........................................................................................................................................... 149
Cannot calibrate. ........................................................................................................................................................... 144
Excessive temperature or humidity. ..................................................................................................................... 145
Please execute common calibration. .................................................................................................................... 145
Please commn calibrt using above paper. ......................................................................................................... 145
Please calibrate using above paper. ..................................................................................................................... 145
Before borderless printing, move the blue platen switch. .......................................................................... 146
Borderless printng not possible. ............................................................................................................................ 140
Blue platen switch is dirty. ........................................................................................................................................ 146
Move the blue platen switch No.xx to the right. (xx represents a number) ........................................ 146
Cannot adjust paper feed. ........................................................................................................................................ 146
Check printed document. .......................................................................................................................................... 146
Spectrophotometer Unit not connected. ........................................................................................................... 146
Spectrophotometer Sensor not mounted. ........................................................................................................ 146
Spectrophotometer Unit Calibration white tile error. ................................................................................... 147
Spectrophotometer Unit eject guide not mounted. ...................................................................................... 147
Spectrophotometer Unit Backing plate error. ................................................................................................. 147
Spectrophotometer up-down unit cover open. ............................................................................................... 147
Spectrophotometer Unit cover open. .................................................................................................................. 147
Spectrophotometer read error. .............................................................................................................................. 147
Clean calibration white tile because it may be dirty. ..................................................................................... 148
Cannot execute this command. Use other paper.
Cannot execute this command. Use other paper.
Cause Corrective Action
Paper compatible with
color calibration is not
loaded.
1.
Press the OK button to clear the error.
2. Load paper that is compatible with color calibration.
See the Paper Reference Guide.
(See Paper Reference Guide .)
Always make sure the loaded paper matches the type of paper in the printer paper settings. Adjustment cannot
be completed correctly unless the loaded paper matches the settings.
Cannot print as specified.
Cannot print as specified.
Cause Corrective Action
The loaded paper is too small.
(When you have attempted to print a test print
sheet or other printer status information.)
Replace the paper with paper of A4/Letter (vertical) size or larger as follows.
1.
Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.
(See "Removing Sheets.") →P.29
2. Switch to paper A4/Letter (vertical) or larger.
(See "Loading and Printing on Sheets.") →User's Guide
The printer will resume printing.
Press ▲ or ▼ to select Stop Printing, and then press the OK button.
Cannot calibrate.
Cannot calibrate.
Cause Corrective Action
The paper for printing a test pattern is soiled. Other-
wise, you have loaded colored paper.
Press the OK button to clear the error.
Load unused paper compatible with color calibration.
(See Paper Reference Guide .)
Cannot execute this command. Use other paper.
iPF6450
Basic Guide
Error Message Messages regarding printing or adjustment
144

Canon imagePROGRAF iPF6450 Specifications

General

Brand	Canon
Model	imagePROGRAF iPF6450
Category	Printer
Language	English