8
Hold the Ejection Guide on both sides by the near
end. Aligning the Ejection Guide with the guides
(a), insert it into the printer until it locks in place.
Note
•
If the Spectrophotometer Unit is mounted, grasp
the blue handles on the left and right sides of the
Spectrophotometer Eject Guide, align the protrud-
ing parts of the Spectrophotometer Eject Guide (a)
with the Spectrophotometer Unit guide (b), and
push it in until it clicks.
9
Press the OK button.
The Maintenance Cartridge is now initialized.
Replacing the Maintenance Cartridge
iPF6450
Basic Guide
Consumables and Maintenance Maintenance Cartridge
50
To Next Page
Loading...
Need help?
General