4
Press ▲ or ▼ to select "Yes", and then press the OK button.
As the printer ejects the paper, the paper is stopped momentarily with the trailing edge still held in the roll-
ers.
5
Press the OK button.
The sheet can now be removed.
6
Remove the sheet, keeping the front edge level as
you pull it out.
Important
• If POP Board is accidentally removed at an angle, it may scratch the printed surface.
7
Press the OK button.
Important
• Always remove the sheet before pressing the OK button. If you do not remove the sheet before step 7, it may
go back inside the printer, leaving roller marks across the trailing edge of paper.
8
Lift the four Front Tray Guides above the Ejection
Guide, store them toward the front, and then press
the OK button.
Removing Sheets
iPF6450
Basic Guide
Handling Paper Handling sheets
30
To Next Page
Loading...
