Paper Detailed Settings Dialog Box
The Paper Detailed Settings dialog box offers the following settings. For details on settings items, refer to the printer driv-
er help.
Note
• To display the Paper Detailed Settings dialog box, on the Main sheet, click Settings by Media Type.(See
"Main Sheet →P.220 ")
•
A Drying Time
Specify the time that the printer waits for ink to dry, as needed. The Drying Time setting is only valid for rolls.
• (See "Specifying the Ink Drying Time for Rolls →P.592 ")
•
B Between Pages
Specify the time the printer waits after printing a page until ejecting the paper, as needed.
•
C Between Scans
Specify the time the printer waits after printing a line on the page until printing the next line, as needed.
•
D Roll Paper Margin for Safety
You can specify the length of a margin on the leading edge of paper to ensure that paper susceptible to curling is held
firmly against the Platen.
•
E Near End Margin
Specify the length of the Near End Margin (the leading edge margin) of the roll, as needed.
•
F
Cut Speed
Select the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automatic
cutting is used.
•
G
Mirror
Specify whether to print a mirror image, as needed. Select this option to print a version of the document or image with
the left and right sides inverted.
Windows Software
>
Printer Driver
>
iPF750
Paper Detailed Settings Dialog Box
3
225
To Next Page
Loading...
Need help?
General
