Important
• The layout may collapse if you create a form using existing data. If that is the case, modify the data again.
To start from Microsoft PowerPoint
Below are the steps to start Print Plug-In for Office from Microsoft PowerPoint.
1. Start Microsoft PowerPoint.
2. If Start imagePROGRAF Print Plug-In is displayed on the toolbar/ribbon, click it.
Important
• If the imagePROGRAF Print Plug-In toolbar/ribbon is not displayed, refer to the following.
• When Print Plug-In for Office is not displayed
→P.309
3. Check that the imagePROGRAF Print Plug-In toolbar/ribbon is displayed.
4. Click the buttons on the toolbar/ribbon according to the items you want to set.
Icon Contents
Menu
Displays the About, Help, and Special Settings dialog boxes. (See "Configuring
Special Settings.") →P.356
Printer list
Select Printer.
If you select Show All Printers, the imagePROGRAF printers will be displayed
again. Select this when you want to display all printer drivers or update the display.
Print Button
The print Wizard is displayed.
The settings Print Matching Roll Width, Borderless Printing, Multi-Page Print-
ing, and Print Using Registered Settings can be set.
Large-Format Wizard is displayed.
Settings for Portrait or Landscape Orientation can be set.
Windows Software
>
Print Plug-In for Office
>
To start from Microsoft PowerPoint
iPF750
3
330
To Next Page
Loading...
Need help?
General
