Canon imagePROGRAF iPF750 MFP M40 User Manual

No printhead
Cause Corrective Action
No Printhead is installed. Install the Printhead.
(See "Replacing the Printhead.") →P.741
Execute printhead cleaning.
Cause Corrective Action
The Printhead
nozzles are clog-
ged.
Follow these steps to clean the Printhead.
1. Stop printing by pressing ▲ or ▼ to select Stop Printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.740
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.741
Press ▲ or ▼ to select Print, and then press the OK button to resume printing. However, note
that this error may affect the printing quality.
If OK is shown on the Display Screen, clean the Printhead.
1. Press the OK button on the Control Panel to stop printing.
2. Clean the Printhead.
(See "Cleaning the Printhead.") →P.740
If the message is still displayed when printing, replace the Printhead.
(See "Replacing the Printhead.")
→P.741
Error Message > Messages regarding printheads >
iPF750
No printhead
12
827

Canon imagePROGRAF iPF750 MFP M40 Specifications

General

Print Technology	Inkjet
Maximum Print Resolution	2400 x 1200 dpi
Number of Ink Colors	5
Ink Tank Size	130 ml
Number of Nozzles	15, 360
Memory	256 MB
Operating Systems	Windows, Mac OS
Media Thickness	0.07 - 0.8 mm
Connectivity	USB 2.0, Ethernet
Ink Cartridge Configuration	Individual ink cartridges
Media Handling	Roll and Sheet