Department ID Management
6-10
6
System Manager Settings
8
Select [On] or [Off] next to the functions (other than the Copy
function) you want to limit using Department ID Management
âžž press [OK].
Details of each item are shown below.
[Send] appears if the optional Universal Send Kit is activated, and the optional
Super G3 FAX Board is installed, or if only the optional Universal Send Kit is
activated. If only the optional Super G3 FAX Board is installed, [Fax] appears.
9
Press [Done].
10
Press [OK].
NOTE
If you selected [On] in step 2, pressing [OK] activates Department ID Management.
Changing the Password and Page Limit
You can change the password and page limit settings that you have registered.
1
Press (Additional Functions) âžž [System Settings] âžž
[Dept. ID Management].
2
Press [On] âžž [Register Dept. ID/Password].
[On]: Department ID Management is set for the selected function(s).
[Off]: Department ID Management is set only for copying and printing
operations from computers.
To Next Page
Loading...
Need help?
General
