Remote UI
6-17
6
System Manager Settings
Remote UI
You can set whether to enable the Remote UI (User Interface) to operate the
machine and change settings.
NOTE
For more information on the Remote UI, see the Remote UI Guide.
1
Press (Additional Functions) ➞ [System Settings] ➞
[Remote UI].
2
Select [On] or [Off].
Details of each item are shown below.
● If you select [On]:
❑
Select [On] or [Off] for <Use SSL> ➞ press [OK].
Use SSL (Secure Sockets Layer)
● If you select [Off]:
❑
Press [OK].
[On]: Settings can be specified and the machine can be operated through the
Remote UI.
[Off]: Settings cannot be specified and the machine cannot be operated
through the Remote UI.
[On]: SSL is used to communicate.
[Off]: SSL is not used to communicate.
To Next Page
Loading...
Need help?
General
