Canon LASER CLASS 2050P User Manual

15-4 The Menu System Chapter 15
HT1-2205-000-V.1.0 LSL User’s Guide
USER SETTINGS
For details on accessing the settings below, see page 15-3.
Setting Description Sub-Settings
1.DATE & TIME Sets the current date and time. (See page 3-9.) –
2.UNIT
TELEPHONE #
Enters the fax/telephone number you want to appear
at the top of each fax page you send. (See page 3-10.)
–
3.UNIT NAME Enters the name or company name you want to appear at the
top of each fax page you send. (See page 3-10.)
–
4.TX TERMINAL ID Prints your ID (transmitting terminal ID) on each page of the
document you transmit. (See page 3-8.)
TTI POSITION Selects whether the sender information is positioned inside or
outside the image area. (See page 3-8.)
OUTSIDE IMAGE
INSIDE IMAGE
TELEPHONE #
MARK
Selects the prefix for the machine number. ( See page 3-8. ) FAX
TEL
5.SCAN
CONTRAST
Selects the scanning contrast. (See page 6-14.) STANDARD
DARKER
LIGHTER
6.OFFHOOK
ALARM
Enables/disables the off hook alarm that alerts you
that the handset is not seated properly in its cradle.
ON
OFF
7.VOLUME
CONTROL
Sets the volume of the machine sounds. –
CALLING VOLUME Selects the ring volume when the machine detects a voice call. 1/2/3
KEYPAD VOLUME Selects the keypad touch beep volume. 0 (off)/1/2/3
ALARM VOLUME Selects the error alarm volume. 0 (off)/1/2/3
LINE MONITOR
VOL
Selects the line monitor volume. (sound during dialing) 0 (off)/1/2/3
8.RX CALL LEVEL Selects the ring type for incoming calls. HIGH
STANDARD
9.TEL LINE TYPE Selects the telephone line type setting for your machine. (See
page 3-12.)
TOUCH TONE
ROTARY PULSE
(Default settings are shown in bold type)
l-1100.book Page 4 Friday, December 13, 2002 5:07 PM

Canon LASER CLASS 2050P Specifications

General

Brand	Canon
Model	LASER CLASS 2050P
Category	All in One Printer
Language	English