Revision-1,
MAR.
1980
I
uRsmmm^^s^'mi^^.Mi^m,:^^;^^^^^.
E'-
o
O
o
O
•>;t
x^
10cm
INSTALLATION
SUGGESTIONS
To
produce
the
greatest
efficiency and prolong
the
life of
the
machine,
the following items
are
recommended;
Machine
spacing
should be as specified in the
figure
on the
right.
Floor
should be
horizontal.
Room
should be
well ventilated.
Grounding
should
conform
to local
regula-
tions.
Avoid a
location
which
is exposed
to
too
high or too
low temperature,
high
humidity,
dust,
ammonia gas,
vibration and
direct
sun-
light. Hang
curtains
on the
windows if nec-
essary.
In cold
and
humid
areas, so that the
auxiliary
heaters can keep the key
components of
the
printer in good
environment,
do
not disconnect the power plug.
The auxiliary
heaters operate as
long
as
AC power is
available
from the wail. Also built-in developer heater is available as an
option for
extremely cold areas to
ensure quick
starting.
When
moving or transporting an LBP-10 which has been used, remove
developer
so
that
liquid
will not
spill out.
-180cm-
12-
To Next Page
Loading...
