Canon LBP-10 - Corona Wire Cleaning

SUGGESTIONS FOR
DAILY USE
CORONA
WIRE
CLEANING
it is
recommended
that
corona
wires of the
corona ass'y-B and
-D
be cleaned
once
every week according
to
the
following
procedure.
1
.
Remove
the
corona ass'y-
2.
Using
the
applicator,
apply the
cleaner
-
after
squeezing
out
excess
—
to
the
wire
until
the
black
contamination
is
removed.
3.
Push
the
corona ass'y
fully into the
LBP-10.
CAUTION:
Wipe
off or
vaporize the clean-
er
solution
on the
corona
wire
well
before
reinstallation.
Wire
Cleaner
Sponge
Pad
STORAGE
OF
CONSUMABLES
Take care
the
print paper
to
keep dry.
When the
paper
in
the
cassette is not used for an extended
period of
time, close the cassette top
cover.
Store the
toner
and
premix
bottles
in
a dark and
coo!
place.
Toner
and
premix are
inf
tamable. Keep them away
from
open
fires.
EMERGENCY STOP
For
the
event of unexpected
accidents {such
as
going on fire, emitting
smoke,
sparking,
etc.),
EMERGEN-
CY STOP SWITCH is provided
on the pedestal.
This switch
must
be
kept normally on, and should
be
turned
off only in an
emergency.
Emergency
Stop
Switch