Setting Page
77
Configure the startup, authorization, and view of the Viewer.
General
[Default Page]
Sets the Setting Page or the Viewer as the first page to display when the camera is connected.
If users other than the administrator use the Viewer, set [Default Page] to [Display Viewer].
Viewer Settings
[User Authentication]
Displays the user authentication screen when the camera is connected to the Viewer (P. 31). If you select [Authenticate],
only the administrator or an authorized user (P. 71) can connect.
[H.264 for Guest Users]
Set whether guest users may receive H.264 video. If you select [Enable], the [H.264] button will be displayed even when a
guest user connects to the viewer (P. 37).
If you select [Enable], the [CANON SOFTWARE LICENSE AGREEMENT] dialog box is displayed. Click [Yes] to accept the
terms of the license agreement.
[Basic] > [Viewer]
Configuring the Viewer
Additional H.264 licenses are required to receive H.264 video on multiple computers (P. 14). Select [Disable] for environments in which
license management cannot be performed, such as environments in which multiple unspecified users access the camera.
The following settings can be configured here.
• General
• Viewer Settings
To Next Page
Loading...
Need help?
General
