Canon MF5630 - Confirming and Deleting Copy Jobs

7-2
System Monitor
7
3 Press [ (-)] or [ (+)] to confirm the fax/telephone number.
NOTE
For the fax job with multiple destinations (sequential broadcasting), only the fax/telephone number to be sent first
is displayed.
4 If you want to delete the fax job, press [OK].
NOTE
If you delete the fax job with multiple destinations, the machine does not send the fax to any of the destinations
registered for the job.
5 If you decide to delete the job, press [ (-)] for <YES>.
NOTE
To cancel deleting the job, press [(+)] for <NO>. Once the job is deleted, the job cannot be restored.
Confirming Transmission Results
Follow the procedure below to confirm the sending or receiving results.
1 Press [Status Monitor].
2 Press [ (-)] or [ (+)] to select <TX/RX LOG> ➞ press [OK].
NOTE
If there is no job, <NOT FOUND !> is displayed.
3 Press [ (-)] or [ (+)] to confirm the sending or receiving results.
Confirming and Deleting a Copy Job
1 Press [Status Monitor].
2 Press [ (-)] or [ (+)] to select <COPY STATUS> ➞ press [OK].
NOTE
• If there is no job, <NO COPY JOBS EXIST> is displayed.
• If there is only one copy job, go to step 4.
3 Press [ (-)] or [ (+)] to confirm the job number, and the quantity of copies.