8-7
Maintenance
8
3
Remove the new cartridge from its protective bag.
NOTE
Save the protective bag. You may need it later when you remove the cartridge from the machine.
4
Rock the cartridge 5 or 6 times to distribute the toner evenly.
5
Place the cartridge on a flat and stable surface. Fold the tab (A) on the sealing tape (B) as shown below,
and pull it out straight while supporting the cartridge.
Make sure that the tab itself is detached from the cartridge.
IMPORTANT
To avoid breaking the tape, do not pull out the tape at an upward or downward angle.
A
B
To Next Page
Loading...
