Canon MF5630 - Page 77

10-3
Machine Settings
10
(The factory default setting is in bold face.)
* Only for the MF5650 model.
4. RX DONE TONE Sets the reception end tone settings.
ERROR ONLY The reception end tone sounds only when any error
occurs while printing.
1 to 3 (1)
OFF The reception end tone does not sound.
ON The reception end tone sounds.
1 to 3 (1)
5. PRINT DONE TONE Sets the printing end tone settings.
ERROR ONLY The printing end tone sounds only when any error
occurs while printing.
1 to 3 (1)
OFF The printing end tone does not sound.
ON The printing end tone sounds.
1 to 3 (1)
6. SCAN DONE TONE Sets the scanning end tone settings.
ERROR ONLY A scanning end tone sounds only when any error occurs
while scanning.
1 to 3 (1)
OFF The scanning end tone does not sound.
ON A scanning end tone sounds.
1 to 3 (1)
7. LINE MONITOR VOL. Adjusts the line monitor volume.
0 to 3 (1)
3. TONER SAVER MODE Sets the toner saver mode.
OFF The toner saver mode is turned off.
ON The toner saver mode is turned on.
4. DISPLAY LANGUAGE Shows the language displayed in the LCD.
ENGLISH, FRENCH, SPANISH, GERMAN, ITALIAN,
DUTCH, FINNISH, PORTUGUESE, NORWEGIAN,
SWEDISH, DANISH, SLOVENE, CZECH,
HUNGARIAN, RUSSIAN
Name Descriptions