N: New adjustment item
*1: New Service Tool that operates only on a pre-registered computer.
(2) Periodic maintenance
No periodic maintenance is necessary.
(3) Periodic replacement parts
There are no parts in this machine that require periodic replacement by a service engineer.
(4) Replacement consumables
There are no consumables that require replacement by a service engineer.
at the same
time.)
N
Carriage rail
position adjustment
- At carriage unit replacement
- At carriage unit removal
To set the carriage rail to the
original position prior to removal
or replacement of the carriage
unit, put a mark on the main
chassis before removal of the
carriage unit.
None. 1 min.
LAN resetting - At logic board replacement
- At WLAN board replacement
To initialize the network setting. None.
Perform in the user
mode.
- Machine buttons
- Host computer (IJ
Network tool)
1 min.
Wired / Wireless
LAN setting
information display
- At confirmation of the
network setting
To confirm the network setting. None.
Perform in the user
mode.
- Machine buttons
- Host computer (IJ
Network tool)
1 min.
- The red screws securing the paper feed motor may be loosened only at replacement of the paper feed motor unit.
- For print head alignment, perform the manual print head alignment using plain paper.
To Next Page
Loading...
