Canon Pixma MG3550 User Manual

Changing the Settings in the Wireless LAN Sheet
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
Note
• This screen is not available depending on the printer you are using.
• Activate the wireless LAN setting of the printer to change the settings in the Wireless LAN sheet.
1.
Start up IJ Network Tool.
2.
Select the printer in Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with
"USBnnn" (where "n" is a number) appearing in the Port Name column.
3.
Select Configuration... from the Settings menu.
4.
Click the Wireless LAN tab.
The Wireless LAN sheet is displayed.
For details on the Wireless LAN sheet, see Wireless LAN Sheet.
5. Change the settings or confirm.
SSID:
Enter the same value that was set for the target access point.
When the printer is connected with USB, the Search screen appears by clicking Search.... Set the
SSID of the access point by selecting the one of the detected access points.
Search Screen
150

Canon Pixma MG3550 Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Print Speed (Mono)	9.9 ipm
Print Speed (Color)	5.7 ipm
Connectivity	Wi-Fi, USB
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Paper Input Capacity	100 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan
Print Technology Detail	FINE Cartridge
Copy Speed (Black)	2.7 ipm
Ink Cartridges	PG-540, CL-541
Dimensions (W x D x H)	449 x 304 x 152 mm
Weight	5.4 kg
Supported Media Sizes	A4, A5, B5, Envelopes
Operating Systems	Windows XP/Vista/7/8, Mac OS X v10.6.8 or later