Canon Pixma MG3550 User Manual

Changing the WEP Detailed Settings
Note
• This screen is not available depending on the printer you are using.
To change the wireless network settings of the printer, connect the printer and the computer with a USB
cable temporarily. If you modify the wireless network settings of the computer over wireless connection
without USB connection, your computer may not be able to communicate with the machine after modifying
the settings.
1.
Start up IJ Network Tool.
2.
Select the printer in Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer with
"USBnnn" (where "n" is a number) appearing in the Port Name column.
3.
Select Configuration... from the Settings menu.
4.
Click the Wireless LAN tab.
5.
Select Use WEP in Encryption Method: and click Configuration....
The WEP Details screen is displayed.
6.
Change the settings or confirm.
When changing the password (WEP key), the same change must be made to the password (WEP key) of
the access point.
1.
WEP Key:
Enter the same key as the one set to the access point.
The number of characters and character type that can be entered differ depending on the key
length and key format.
Key Length
64bit 128bit
Key Format ASCII 5 characters 13 characters
152

Canon Pixma MG3550 Specifications

General

Print Technology	Inkjet
Max Print Resolution	4800 x 1200 dpi
Print Speed (Mono)	9.9 ipm
Print Speed (Color)	5.7 ipm
Connectivity	Wi-Fi, USB
Scanner Type	Flatbed
Scanner Resolution	1200 x 2400 dpi
Paper Input Capacity	100 sheets
Duplex Printing	Yes
Functions	Print, Copy, Scan
Print Technology Detail	FINE Cartridge
Copy Speed (Black)	2.7 ipm
Ink Cartridges	PG-540, CL-541
Dimensions (W x D x H)	449 x 304 x 152 mm
Weight	5.4 kg
Supported Media Sizes	A4, A5, B5, Envelopes
Operating Systems	Windows XP/Vista/7/8, Mac OS X v10.6.8 or later