104
3 Use the or button to select
, , or .
z Settings can be made by turning the multi
control dial.
z The Setup menu closes.
Protecting Images
You can protect important images from accidental erasure.
1 In the [ (Play)] menu, select
[Protect] and press the FUNC./SET
button.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2 Use the or button to select an
image you want to protect and
press the FUNC./SET button.
z The icon appears on protected images.
z To remove the protection, press the FUNC./
SET button again (in protection mode).
z You can make the selection of images easier
by toggling between single image playback and index playback with the
zoom lever.
z During index playback, press the zoom lever toward to jump nine
images at a time. To select or deselect images, press the zoom level
toward to remove the Jump Bar (p. 89), then proceed.
z Settings can be made by turning the multi control dial.
Please note that formatting (initializing) a memory card erases all
data (p. 23), including protected images and other file types. Please
check the contents of a memory card before formatting it.
EC176CUG_E.book Page 104 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
