21
Preparing the Camera
1
Changing the Review Duration
1 Select [Review] from the [ (Rec.)] menu and use the
or button to select the duration setting.
z See Selecting Menus and Settings (Basic Guide: p. 16)
z Settings can be made by turning the multi control dial.
Off: Images do not display.
2 to 10 sec.:Images appear for the time
selected even if the shutter button
is released.
Hold: The image is displayed until the shutter
button is pressed again halfway.
2 Press the MENU button.
You can shoot the next image while a menu is still displayed.
Power Saving Function
This camera is equipped with a power saving function. Depending on
the power saving setting, the camera may power down or the LCD
monitor may go off automatically.
Auto Power Down
[On]:
z
Shooting mode: Powers down approximately 3 minutes after the
last time a control is accessed on the camera. The LCD monitor
automatically shuts off approximately 1 minute* after the last
time a camera control is accessed even if [Auto Power Down] is
set to [Off]. In this situation, press a button or turn the camera
lengthwise and the LCD monitor reacts accordingly.
* This time can be changed.
z
Playback mode: Powers down approximately 5 minutes after
the last time a control is accessed on the camera.
z
Printer Connection mode: Powers down approximately 5
minutes after the last time a control is accessed on the camera.
[Off]: The power saving function does not activate.
EC176CUG_E.book Page 21 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
