60
Using the Shortcut Button
1 Press the button.
The registered function is activated and its
icon appears on the LCD monitor or
viewfinder.
z Each press of the button cycles
between setting values of the registered
function.
z Functions that are not available in the
current shooting mode will not appear even
if they are registered. Select a compatible shooting mode and press
the button again.
Selecting an AF Frame
The AF frame indicates the area of the composition on which the camera
focuses. You can set the AF frame in the following way.
z
For selecting AiAF (auto selection) or 1-point, see below.
z
See Setting an AF Frame Manually. (p. 61)
* (Kids&Pets), (Fireworks) modes cannot be set.
You can set the AF frame to Auto Selection (AiAF) or to 1-point. When
Auto Selection (AiAF) is selected, the camera automatically selects an AF
frame from 9 points to focus according to the shooting conditions. With the
digital zoom, the 1-point AF-frame is always selected.
1 Press the button.
The AF frame appears in green on the LCD monitor.
Mode Dial
*
EC176CUG_E.book Page 60 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
